Digital Temperature Controller For Reptile Snake Lizard Heat Mat Incubator with Carabiner

Description

Description:Digital Temperature Controller For Reptile Snake Lizard Heat Mat Incubator with CarabinerSpecification:Power: 50Hz AC220VThe maximum load power: 2000WTemperature control working temperature: 0 ~40℃Temperature measurement range: -35 ~55℃Refrigeration temperature control range: -30 ~38℃Thermal control range: +5 ~45℃Return difference temperature: 1℃Temperature accuracy: 1℃Sensor exchange accuracy: R:10K 1% , B:34701%Probe length 2.5 meters.Size:11.5 x 6.5 x 2.6cm(L x W x H)Operating instructions:1, PowerThe controller is connected to the power supply, the temperature control device is self check, the digital tube is full, the indicator light is bright.The default setting value of the factory is 25, the setting value is 5 and the working state is heated.2, Indicator lightYellow light on the panel said the heating mode, the green light means that the cooling mode, red light means that the heating or refrigeration operation, red light means that the current temperature has reached the set temperature requirements.3,Temperature settingSetting key: switching between normal operation and temperature setting.Up key: used to raise temperature.Down key: used to reduce the setting temperature.Working mode:Refrigeration: when the control temperature is more than or equal to the set temperature + 1 DEG C, switch on a load power supply; when thetemperature is less than or equal to control set temperature – 1 DEG C, cut off the power supply of the load.Heating: when the control