Front Hood Lift Supports Shocks Springs Props for Hummer H3 2006-2010

$18.40

Front Hood Lift Supports Shocks Springs Props for Hummer H3 2006-2010Features:Easy to install.YQ compression gas springs type, also known as free type gas spring, supporting bar, nitrogen spring is a high-pressure gas sealed in the cylinder, the piston produced by the elastic features of the product. The product does not need to work at the outside power, constant lifting force. Fully open the rear door is widely used in automobile, hood, back door luggage, mechanical equipment, construction machinery, furniture, fitness equipment, and other fields. It has a long life, easy to control, no maintenance and so on.Specification:Compressed Length: 15.8cmExtended Length: 40cmSuitable for For 2006-2010 Hummer H3Installment:1. Use Safety stands whenever a procedure requires you under the vehicle or supports. Or have someone hold the lid open for you so that they can raise or lower it as needed.2. Before removing the old lift support, inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended length.3. Remove the old support from the vehicle by placing a small flat headed screw driver under the U shaped band on the ends of the support. Slowly turn the screw driver and it will lift up on the band approx.1/8, then pull the support away from the vehicle and it will release.4. To install the new supports do the same procedure in reverse. DO NOT jam the new support end over the ball socket without lifting the U band

SKU: 19_10523_1076935 Category:

Description

Front Hood Lift Supports Shocks Springs Props for Hummer H3 2006-2010Features:Easy to install.YQ compression gas springs type, also known as free type gas spring, supporting bar, nitrogen spring is a high-pressure gas sealed in the cylinder, the piston produced by the elastic features of the product. The product does not need to work at the outside power, constant lifting force. Fully open the rear door is widely used in automobile, hood, back door luggage, mechanical equipment, construction machinery, furniture, fitness equipment, and other fields. It has a long life, easy to control, no maintenance and so on.Specification:Compressed Length: 15.8cmExtended Length: 40cmSuitable for For 2006-2010 Hummer H3Installment:1. Use Safety stands whenever a procedure requires you under the vehicle or supports. Or have someone hold the lid open for you so that they can raise or lower it as needed.2. Before removing the old lift support, inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended length.3. Remove the old support from the vehicle by placing a small flat headed screw driver under the U shaped band on the ends of the support. Slowly turn the screw driver and it will lift up on the band approx.1/8, then pull the support away from the vehicle and it will release.4. To install the new supports do the same procedure in reverse. DO NOT jam the new support end over the ball socket without lifting the U band

Reviews

There are no reviews yet.

Be the first to review “Front Hood Lift Supports Shocks Springs Props for Hummer H3 2006-2010”

Your email address will not be published. Required fields are marked *




Boomboxes

Take clearer, more explosive sound everywhere you want.