13Pcs Fiber Optical FTTH Power Meter Cleaver Red Light Test Pen Cable Cutter Piper Kit

Description

Fiber Optical FTTH Tool Kit Fiber CleaverOptical Power Meter FinderProduct DescriptionFiber cleaverTechnical Parameters:Applicable bare fiber diameter: 125umApplicable fiber core number: single coreApplicable fiber coating diameter: 0.250.9mmNeed to strip length before fiber cutting: fiber cutting length +18mm or moreFiber cutter length: 9-16mm (0.25mm) 10-16mm (0.9mm)Representative value of the cutting angle: 0.5Blade life: 48000 core wireSize: 75x63x63mmOperation method:1. Open the switch fiber plate cover and open the plate of the single-core fiber clamp. Confirm the position of the kni-fe holder on the front side2. Place the fiber in the V-groove of the single-core fiber clamp and align the fiber coating to remove the boundary line and the scale on the fixture, as needed.3. Cap the clip of the single-core fiber clamp to clamp the fiber. Close the fiber platen cover and push the tool holder inward to cut the fiber4. Open the fiber-optic panel cover and open the fiber-optic clip while opening the clip of the single-core fiber clamp. Dont forget to remove fiber debris.Optical power meterTechnical ParametersWavelength range: 800~1700nmConnector: FC/SC/ST (optional)Probe type: InGaAsPower measurement range: -70~+3 or -50~+20Uncertainty: 5%Standard wavelength (nm): 850/1300/1310/1490/1550/1625Display resolution: linear display: 0.1%, logarithmic display: 0.01dBmRed light working wavelength (one machine series): 650nmRed light power (one machine series) (MW): 1, 5, 10, 20, 3